Human Factors  Course Syllabus: EASA Part M (EU No 1321/2014 Annex II)

Release date: 15-May-2016 

Course Information

 

Course Description:

The EASA Part M course is a two-day training focusing on the requirements for commercial air transport. This course is developed in order provide students with a full understanding of the operator’s responsibilities, contracted arrangements, Subpart B, C & G responsibilities and Subpart I ARC arrangements.

 

 

Course Objectives:

By completing this course, the participants will have a broad and structured view of the Part M and the relation with EASA Part 145.

 

 

Learning objectives:

After completion of this course you will:

  • know what EASA Part M includes
  • understand and be able to explain what Part M subparts B, C and G represents
  • be able to make a connection between the content of the training and management tasks of a CAMO
  • know what a CAME is and where it is used for
  • have the fundamental knowledge to understand what is required for obtaining a CAMO approval

 

 

Regulatory requirement compliance:

This training course includes the following amendments to the regulation, AMC and GM: 

 

  • Commission Regulation (EU) No 1321/2014 including amendments (EU) 2015/1088 and (EU) 2015/1536 
  • Acceptable Means of Compliance and Guidance Material to Annex I (Part M) to Commission Regulation (EU) No 1321/2014 Issue 2 — Amendment 1

 

 

Prerequisites:

A general understanding and some background knowledge of the operation of EASA Part M Subpart G, F and Part 145 approved organizations.

 

 

Course Topics

 

Module 1:  Introduction to PART M

Module 2:  Subpart B Responsibilities

Module 3:  Subpart C Continuing Airworthiness

Module 4:  Subpart G Continuing Airworthiness Management

Module 5:  Subpart I Airworthiness Review Certificate

Module 6:  CAMO and CAME

 

 

Course Duration:

The course programme shall consist of three days and starts at 9.00 till 16.00. Additional breaks may be taken as needed. The course programme will be as follows:

 

DAY 1:

09.00 – 10.30 Start Part 1 and 2

10.30 – 10.45 Coffee Break

10.45 – 12.00 Continue Part 2

12.00 – 12.45 Lunch Break (30 to 45 minutes depending on the local needs)

12.45 – 14.30 Start Part 3

14.30 – 14.45 Coffee Break

14.45 – 16.00 Continue Part 3

 

DAY 2:

09.00 – 10.30 Start Part 4

10.30 – 10.45 Coffee Break

10.45 – 12.00 Start Part 5

12.00 – 12.45 Lunch Break (30 to 45 minutes depending on the local needs)

12.45 – 14.30 Start Part 6

14.30 – 14.45 Coffee Break

14.45 – 16.00 Examination

 

 

Materials used

 

Required Materials:

  • None

 

Supplemental Materials:

  • None

 

 

Hardware/Software requirements and Browser information

 

Hardware requirements:

We recommend to bring a laptop or tablet with WiFi connection. During the course, we will visit the EASA website regularly and at the end of the course you will perform an online examination.

 

Software requirements:

No additional software requirements are applicable.

 

Browser information:

A reliable computer or tablet with WiFi internet connection and internet browser (e.g. Internet Explorer, Google Chrome or Firefox) are required.

 

 

 

Instructor information

 

Instructor credentials:

Danny Goergen has over 10 years of experience in the aviation industry. After several years working as an aircraft mechanic, he graduated as Bachelor in Aviation Engineering and started as a process engineer in an EASA Part 145 approved component repair shop. 

 

Within this organisation he had two EASA Form 4 positions as Technical Manager and Quality Assurance Manager. In this last position he developed himself as an internal trainer, providing training in EASA/FAA/CAAC Part 145 regulations, Human Factors and Company Processes and Procedures. One of the first training courses he developed was an EASA Part M course in 2009. 

 

At the moment Mr. Danny Goergen is, on behalf of HACE, contracted in several interim quality management positions. One of his clients is the Part 147 approved Aviation Competence Centre (ACC), where he holds the EASA form 4 position of Quality Assurance Manager. Besides managing the Part 147 quality system, he is also responsible for training the ACC staff in EASA Part 66-147 regulations awareness and MTOE procedures.

 

 

Contact information:

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.  

 

 

Assessment and Grading

 

Testing procedure:

Students will need to go through examination by online testing.

 

Grading procedure:

In order to receive a Certificate of Course Completion, the student needs to attend the full course and complete the online examination with >75% score. 

 

 

 

Assignments and Participation

 

Assignments and Projects:

The are no assignments or projects included in this course. 

 

Class Participation:

Students must participate in all interactive aspects of the course. Students are expected to communicate with the instructor as a learning resource and actively participate in discussions. 

 

 

 

Course Ground Rules

 

Participation is required. The student expected to communicate with other students in team projects, learn how to navigate in the learning environment system, keep abreast of course announcements, use the student e-mail address opposed to a personal e-mail address.

 

The students shall address technical problems immediately and observe course netiquette at all times. 

 

 

Communication guidelines

 

E-mail:

  • Always include a subject line.
  • Select your wordings in the e-mail carefully. Use of emoticons can help to include the correct emotion in the message.
  • Use standard fonts
  • Do not send large attachments
  • Special formatting such as centring, audio messaging, tables, html, etc. should be avoided as much as possible.
  • Respect the privacy of other students or class members

 

Discussion Groups:

  • Review the discussion threads thoroughly before entering the discussion.
  • Try to maintain threads by using the reply button, instead of starting a new topic
  • Do not make insulting or inflammatory statements to other members of the discussion group. Be respectful of other's ideas
  • Be patient and read the comments of other group members thoroughly before entering your remarks
  • Be cooperative with group leaders in completing assigned tasks
  • Be positive and constructive in group discussions
  • Respond in timely manner

 

Chat:

  • Introduce yourself in the chat session
  • Be polite. Choose words carefully. Do not use derogatory statements.
  • Be concise in responding in the chat session
  • Be prepared to open the chat session at the schedules time

 

  

Course content change

 

The instructor reserves the right to make changes to this syllabus and the course content. If changes are necessitated during the term of the course, the instructor will notify the students of such changes.

 

 

Technical Support

 

If you experience problems logging into your course, timing out of your course, using course website tools, or other technical problems, please contact our support department Help Desk via:

 

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Telephone: +31(0) 20 89 46 490

 

 

Pricing and Course Registration

 

 

Price/Fee (excl VAT):

  

1 student: € 600,00 per person
2 - 4 students: € 300,00 per person
5 - 8 students € 150,00 per person
9 - 12 student € 130,00 per person
13 - 20 students € 120,00 per person

 

 

>> Download the registration form here* 

 

* Open the form with Adobe Acrobat Reader when you would like to save or e-mail your input.